Metallic Color Laser Transfer Paper
Laser-Metallic color transfer paper (TSL-300)
Laser-Metallic color transfer paper (TSL-300) can be painted by OKI C5600, and Fine-Cut by desk cutting plotter such as Silhouette CAMEO, Circut etc.then transferred onto dark or light colored cotton fabric, cotton/polyester blend, 100%polyester, cotton/spandex blend, cotton/nylon etc by a regular household iron or heat press machine. Decorate fabric with photos in minutes, after transferring, get great durability with image retaining color, wash-after-wash.
Metallic color laser transfer paper is ideal for customizing dark, or light colored T-shirts, aprons, gift bags, mouse pads, photographs on quilts and more. With metallic background, the color will be changed with the metallic effect after transferring.
■ Single feed, or roll by roll printed by oki Data, Konica minolta, Fuji-Xerox etc.
■ Customize fabric with favorite photos and color graphics.
■ Designed for vivid results on dark, light-colored cotton or cotton/polyester blend fabrics
■ Ideal for personalizing T-shirts, canvas bags, aprons, gift bags, mouse pads, photographs on quilts etc.
■ Iron on with a regular household iron & heat press machines.
■ Great durability with image retaining color, wash-after-wash.
Metallic Images of T-shirts with Laser-Metallic color transfer paper (TSL-300)
More application and fabric
It can be printed by some of color laser printers such as : OKI C5600n-5900n, C8600-8800C, Epson Laser C8500, C8600, HP 2500L, 2600, Minolta CF 900 9300/9500, Xerox 5750 6250 DC 12 DC 2240 DC1256GA, CanonCLC500, CLC700, CLC800, CLC1000, IRC 2880 etc.
Paper source (S): Multi-purpose carton, thickness (T): extra thick
6.Heat press transferring
1). Setting a heat press at 155~165°C for 25~35 seconds using moderate pressure.
2). Briefly heat the fabric for 5 second to ensure that it is completely smooth.
3). Leave the printed image to cold for approx.15 minutes, cut out the motif without leaving a margin around the edges. Peel the image line off from the backing paper gently by hand.
4). Place the image line facing upwards onto the target fabric
5). Place the grease proof paper onto it.
6). Place the cotton fabric onto it.
7). After transferring for 25seonds , move away cotton fabric, then cooling for about several minutes,
Peel the grease proof paper starting at the corner.
Wash inside out in COLD WATER. DO NOT USE BLEACH. Place into the dryer or do hang to dry immediately. Please do not stretch the image transferred or the T-shirt as this may cause cracking to occur, If cracking or wrinkling does occur, please place a sheet of greasy proof paper over the transfer and heat press or iron for a few seconds making sure to press firmly over the entire transfer again.Please remember to not iron directly on the image surface.
Material Handling & Storage: conditions of 35-65% Relative Humidity and at a temperature of 10-30°C.Storage of open packages: When an open packages of media is not being used remove the roll or sheets from the printer cover the roll or sheets with a plastic bag to protect it from contaminants, if you are storing it on end, use an end plug and tape down the edge to prevent damage to the edge of the roll do not lay sharp or heavy objects on unprotected rolls and do not stack them.