Light Color Laser Transfer Paper
Light color laser transfer paper can be printed some of color laser printers such as OKI,Minolta, Xerox DC1256GA, Canon etc, then transferred onto white or light colored cotton fabric, cotton/polyester blend, 100%polyester, cotton/spandex blend, cotton/nylon etc by a regular household iron or heat press machine. the back paper can be peel off easily with hot. Decorate fabric with photos in minutes. and get great durability with image retaining color, wash-after-wash.
Light color laser transfer paper is ideal for customizing white or light colored T-shirts, aprons, gift bags, mouse pads, photographs on quilts and more.
■ Customize fabric with favorite photos and color graphics.
■ Designed for vivid results on white or light-colored cotton or cotton/polyester blend fabrics
■ Ideal for personalizing T-shirts, canvas bags, aprons, gift bags, photographs on quilts etc.
■ The back paper can be peel off easily with hot
■ Iron on with a regular household iron & heat press machines.
■ Good washable and keep coloration
■ More flexible and more elastic
It can be printed by some of color laser printers such as : OKI C5600n-5900n, C8600-8800C, Epson Laser C8500, C8600, HP 2500L, 2600, Minolta CF 900 9300/9500, Xerox 5750 6250 DC 12 DC 2240 DC1256GA, CanonCLC500, CLC700, CLC800, CLC1000, IRC 2880 etc.
Paper source (S): Multi-purpose carton, thickness (T): extra thick
6.Heat press transferring
1). Setting a heat press at 175~185°C for 15~25 seconds using high pressure.
2). Briefly heat the fabric for 5 second to ensure that it is completely smooth.
3). Leave the printed image to cold for approx.15 minutes, cut out the motif without leaving a margin around the edges.
4). Place the image line facing downwards onto the target fabric
5). Press machine for 15~25 seconds.
6) Peel the back paper starting at the corner in 15 seconds after transferring.
Wash inside out in COLD WATER. DO NOT USE BLEACH. Place into the dryer or do hang to dry immediately. Please do not stretch the image transferred or the T-shirt as this may cause cracking to occur, If cracking or wrinkling does occur, please place a sheet of greasy proof paper over the transfer and heat press or iron for a few seconds making sure to press firmly over the entire transfer again.Please remember to not iron directly on the image surface.
Material Handling & Storage: conditions of 35-65% Relative Humidity and at a temperature of 10-30°C.Storage of open packages: When an open packages of media is not being used remove the roll or sheets from the printer cover the roll or sheets with a plastic bag to protect it from contaminants, if you are storing it on end, use an end plug and tape down the edge to prevent damage to the edge of the roll do not lay sharp or heavy objects on unprotected rolls and do not stack them.