Laser Waterslide decal paper
Product Detail
Laser WaterSlide Decal Paper
Laser Waterslide Decal Paper that can be used by color laser printers, or color laser copy printers with flat feed and flat output, such as OKI Data C941dn, ES9542, Konica Minolta AccurioLabel 230, and vinyl cutters or die cutter with Edge positioning combination, for all your craft projects. Personalize and customize your project by printing unique designs on our decal paper. 
Transfer decals onto ceramics, glass, jade, metal, plastic materials and other hard surface. It is specifically designed for the decoration of all safety headwear, including motorcycle, winter sports, bicycle and skateboarding. or the logos brand owners of bicycle, snowboards, golf clubs and tennis rackets, etc.
Laser WaterSlide Decal Paper (Clear, Opaque, Metallic)
Advantages
■ Compatibility with color laser printers, or color laser copy printers, etc.
■ Good ink absorption, and color retention
■ Ideal for print stability, and consistent cutting
■ Transfer decals onto ceramics, glass, jade, metal, plastic materials and other hard surface
■ Good thermal stability, and weather resistance
Laser Metallic Waterslide Decal Paper (WSSL-300) processing video
what you can do for your craft projects ?
Ceramic Products :
Product Uasge
3. Printer Recommendations
It can be printed by most of color laser printers with with flat feed and flat output,
# OKI C5600n-5900n, C8600-8800C,
# Epson Laser C8500, C8600,
# Konica Minolta C221 CF 900 9300/9500,
# Fuji-Xerox 5750 6250 DC 12 DC 2240 DC1256GA
4. Printing setting
Printing Mode：Quality setting–Picture，Weight-ULTRA Weight
Paper mode: manual feed paper choose–200-270g/m2
Note：The best printing mode, please test in advance
5. Water-slip transferring
Step 1. Print patterns by laser printer
Printing Mode：Quality setting–Picture，Weight-ULTRA Weight
Paper mode: manual feed paper choose–200-270g/m2
Printers Compatibility: OKI (C331Sbn), Minolta (Bizhub SERIES, CLC100/100S/5000), Epson Aculaser (C8600, Xerox5750, Acolor620) etc.
Step 2. Cut patterns by cutting plotters or scissor
Step 3. Submerge you pre-cut decal in 55 °C degree water for 30-60 seconds or until the middle of the decal can easily be slid around. Remove from water.
Step 4. Quickly apply it to your clean decal surface then remove the carrier gently behind the decal, squeeze the images and remove the water and bubbles from the decal paper.
Step 5. Let the decal set and dry for at least 48 hours. Don’t expose to direct sunlight during this time.
Allow to dry for at least 48 hours. Use varnish spray to cover the picture, and the covered spray surface should be more than 2mm larger than the image.
Note: If you want better gloss, hardness, washability, etc., you can use polyurethane varnish, acrylic varnish, or UV-curable varnish to spray coverage protection.
6. Finishing Recommendations
Material Handling & Storage: conditions of 35-65% Relative Humidity and at a temperature of 10-30°C.Storage of open packages: When an open packages of media is not being used remove the roll or sheets from the printer cover the roll or sheets with a plastic bag to protect it from contaminants, if you are storing it on end, use an end plug and tape down the edge to prevent damage to the edge of the roll do not lay sharp or heavy objects on unprotected rolls and do not stack them.
