Inkjet Waterslide decal paper

Product Code: WS-150
Product Name: Inkjet waterslide decal paper
Specification:
A4 (210mm X 297mm) – 20 sheets/bag,
A3 (297mm X 420mm) – 20 sheets/bag,
A(8.5”X11”)- 20 sheets/bag,
B(11”X17”) – 20 sheets/bag, 42cm X30M /Roll,other specifications are requirement.
Printers Compatibility: all inkjet printers.

 


Product Detail

Product Usage

Product Detail

Inkjet WaterSlide Decal Paper

     Inkjet Waterslide Decal Paper that can be used all inkjet printerss, and vinyl cutters or die cutter with Edge positioning combination, for all your craft projects.  Personalize and customize your project by printing unique designs on our decal paper. 

022

     Transfer decals onto ceramics, glass, jade, metal, plastic materials and other hard surface. It is specifically designed for the decoration of all safety headwear, including motorcycle, winter sports, bicycle and skateboarding. or the logos brand owners of bicycle, snowboards, golf clubs and tennis rackets, etc.

WS-150

Advantages

■ Compatibility all inkjet printers
■ Good ink absorption, and color retention
■ Ideal for print stability,  and consistent cutting
■ Transfer decals onto ceramics, glass, jade, metal, plastic materials and other hard surface
■ Good thermal stability, and weather resistance

Inkjet Waterslide Decal Paper (WS-150) processing video 

what you can do for your craft projects ?

Product Uasge

3. Printer Recommendations

It can be printed all inkjet printers,

4. Water-slip transferring

Step 1. Print patterns by inkjet printer

1

Step 2.Seal the waterslide decal paper surfaces with clear acrylic spray. Apple 2-3 clear coats in total. Waiting at least 1 minutes between coats. Allow papers to dry for 5 minutes or longer, depending on manufacturer’s recommended time.

2-2

Step 3.Cut out the images with scissors or cutting plotters.

 3

Step 4.Absorb your waterslide decal paper into room temperature water, and let your decal paper sitting in the water for 30-60 seconds. Applying the waterslide decal paper to any hard surfaces.

 4

Step 5.And squeeze the water and bubbles out with a brush or a wet cloth to make it flat.

 5-5

Allow to dry for at least 48 hours. Use varnish spray to cover the picture, and the covered spray surface should be more than 2mm larger than the image.

Note:  If you want better gloss, hardness, washability, etc., you can use polyurethane varnish, acrylic varnish, or UV-curable varnish to spray coverage protection.

5. Finishing Recommendations

Material Handling & Storage: conditions of 35-65% Relative Humidity and at a temperature of 10-30°C.Storage of open packages: When an open packages of media is not being used remove the roll or sheets from the printer cover the roll or sheets with a plastic bag to protect it from contaminants, if you are storing it on end, use an end plug and tape down the edge to prevent damage to the edge of the roll do not lay sharp or heavy objects on unprotected rolls and do not stack them.


  • Previous:
  • Next:

  • Send your message to us:

    Write your message here and send it to us

    Send your message to us: