I-Cuttable Heat Transfer PU Flex Ejwayelekile

Ikhodi Yomkhiqizo: I-CCF-Ejwayelekile
Igama Lomkhiqizo: I-Cuttable Heat Transfer PU Flex Evamile
Ukucaciswa:
50cm X 25M, 50cm X5M/Roll,
eminye imininingwane iyadingeka.
Ukuvumelana komsiki: abadwebi abavamile bokusika, abafana no-Roland CAMM-1 GR-420, GS-24, STIKA SV-15, Mimaki CG-75/130/160FXII CG-60SRII/130SRII, Graphtec FC8600, CE6000, CE6000-F-F ,CE LITE-50,silhouette CAMEO,GCC-China RX II, Jaguar V, Puma IV, Expert II, AR-24, i-Craft njll.


Imininingwane Yomkhiqizo

Ukusetshenziswa komkhiqizo

Ividiyo

Imininingwane Yomkhiqizo

1.Incazelo Ejwayelekile
I-Cuttable Heat Transfer PU Flex Regular ikhiqizwa ngokwezinga le-Oeko-Tex Standard 100, Ifilimu eguquguqukayo enomthelela okhethekile futhi ene-adhesive evala ukushisa.Kufanelekile ukudlulisela ezindwangu ezifana nekotini, izingxube ze-polyester/ukotini, i-rayon/spandex ne-polyester/acrylic njll.

2.Uhlelo lokusebenza
I-Cuttable Heat Transfer PU Flex Regular ingasetshenziselwa ukubhala izikibha, ukugqokwa kwezemidlalo nokungcebeleka, izikhwama zemidlalo nezindatshana zokukhangisa.futhi ingasikwa ngawo wonke ama-plotter amanje.Sincoma ukusebenzisa ummese ongu-30°.Ngemuva kokukhipha ukhula, ifilimu ye-flexible cut idluliselwa ngomshini wokushisa.Sika ithebula le-PU Flex Regular ngefilimu ye-polyester yokukhulula, inika amandla ukumisa kabusha.

3.Inzuzo
■ Yenza ngokwezifiso indwangu ngemifanekiso eyintandokazi enemibala eminingi.
■ Idizayinelwe imiphumela egqamile kuzindwangu zikakotini ezimnyama noma ezinombala okhanyayo noma eziyingxube kakotini/polyester
■ Ilungele ukwenza izikibha eziqondene nawe, izikhwama zikakhanvasi, amaphinifa, izikhwama zezipho, amaphedi amagundane, izithombe eziphondweni njll.
■ Iyayina ngensimbi yasendlini evamile nemishini yokucindezela ukushisa.
■ Okuwashekayo okuhle nokugcina umbala
■ Ukuguquguquka okwengeziwe nokunwebeka

Ukusetshenziswa komkhiqizo

4.Izincomo Zomsiki
I-Cuttable Heat Transfer PU Flex Regular ingasikwa yibo bonke abaklami bokusika abajwayelekile njenge: Roland CAMM-1 GR/GS-24,STIKA SV-15/12/8 desktop, Mimaki 75FX/130FX series,CG-60SR/100SR/130SR ,Graphtec CE6000 njll.

5.Ukusika isilungiselelo se-plotter
Kufanele ngaso sonke isikhathi ulungise ukucindezela kommese, isivinini sokusika ngokuya ngeminyaka ye-blade yakho kanye ne-Complicated
noma usayizi wombhalo.
CCF-Regular
Qaphela: Idatha yobuchwepheshe engenhla nezincomo zisekelwe ekuhlolweni, kodwa indawo yokusebenza yekhasimende lethu,
ezingalawuleki, asiqinisekisi ukusebenza kwazo, Ngaphambi kokusebenzisa, Sicela uhlole kuqala ngokugcwele.

6.Iron-On ukudlulisa
■ Lungisa indawo ezinzile, ekwazi ukumelana nokushisa efanele uku-ayina.
■ Shisisa i-ayina endaweni ye-< wool>, izinga lokushisa elinconywayo loku-ayina elingu-165°C.
■ Ayina kafushane indwangu ukuqinisekisa ukuthi ishelela ngokuphelele, bese ubeka iphepha lokudlulisa kuyo isithombe esiphrintiwe sibheke phansi.
■ Ungasebenzisi umsebenzi we-steam.
■ Qinisekisa ukuthi ukushisa kudluliselwa ngokulinganayo kuyo yonke indawo.
■ Ayina iphepha lokudlulisa, usebenzisa ingcindezi enkulu ngangokunokwenzeka.
∎ Uma uhambisa insimbi, ukucindezela kufanele kuncishiswe.
■ Ungakhohlwa amakhona namachopho.

1JSJaL0jROGPMmB-MYfwPA
■ Qhubeka noku-ayina uze ulandele ngokuphelele izinhlangothi zesithombe.Yonke le nqubo kufanele ithathe cishe imizuzwana engama-60-70 endaweni yesithombe engu-8”x 10”.Landela ngoku-ayina sonke isithombe ngokushesha, ukushisa lonke iphepha lokudlulisa futhi cishe imizuzwana eyi-10-13.
■ Pefa iphepha elingemuva uqale ekhoneni ngemva koku-ayina.

7.Ukudlulisa ukucindezela kokushisa
■ Ukusetha umshini wokucindezela ukushisa okungu-165°C imizuzwana engu-15~25 usebenzisa ukucindezela okumaphakathi.umshini wokunyathelisa kufanele uvalwe ngokuqinile.
■ Cindezela kafushane indwangu engu-165°C imizuzwana emi-5 ukuze uqinisekise ukuthi ibushelelezi ngokuphelele.
■ Beka iphepha lokudlulisa kulo isithombe esiphrintiwe sibheke phansi.
■ Cindezela umshini 165°C imizuzwana engu-15~25.
■ Pefa ifilimu yangemuva uqale ekhoneni.

8.Imiyalo Yokugeza:
Geza ngaphakathi ngaphandle AMANZI AMAKHANDA.UNGASEBENZISI I-BLEACH.Faka kumshini wokomisa noma ulengise ukuze wome ngokushesha.Sicela ungaluleki isithombe esidlulisiwe noma isikibha njengoba lokhu kungase kubangele ukuqhekeka, Uma ukuqhekeka noma ukushwabana kwenzeka, sicela ubeke ishidi lephepha elifaka amafutha elinamafutha phezu kokudlulisa nokucindezela ukushisa noma i-ayina imizuzwana embalwa uqinisekisa cindezela ngokuqinile kukho konke ukudlulisa futhi.
Sicela ukhumbule uku-ayina ngokuqondile endaweni yesithombe.

9.Ukuqeda Izincomo
Ukuphatha Impahla Nokugcinwa: izimo ezingama-35-65% Zomswakama Ohlobene kanye nezinga lokushisa lika-10-30°C.
Ukugcinwa kwamaphakheji avuliwe: Uma amaphakheji avuliwe emidiya engasetshenziswa susa umqulu noma amashidi kuphrinta amboze umqulu noma amashidi ngesikhwama sepulasitiki ukuze uwavikele ezintweni ezingcolisayo, uma uwagcina ekugcineni, sebenzisa ipulaki futhi tape phansi onqenqemeni ukuvimbela umonakalo onqenqemeni lomqulu ungabeki izinto ezibukhali noma ezinzima emiqulu engavikelekile futhi ungazifaki.


  • Okwedlule:
  • Olandelayo:

  • Bhala umlayezo wakho lapha futhi usithumelele wona