3D UV Printable Vinyl ( HTV-300S ) for jerseys, sport & leisure wear Logo
3D UV Printable Vinyl ( HTV-300S ) is based on polyvinyl chloride film that is produced according to the EN17 standard. It is with hot melt adhesive on 100 micron thickness polyester film line with antistatic treated, which can prevent static electricity during use effectively, Innovative hot melt adhesive is suitable to transfer onto textiles like cotton, mixtures of polyester/cotton, polyester/acrylic, Nylon/Spandex and coated leather, EVA foamed etc.
The thickness of the Printable Vinyl Flex is 180 / 280 /550 microns, which is especially suitable for heat transferring on rough fabrics, wooden boards, leather, etc. It is an ideal material for jerseys, sport & leisure wear, biking wear, labor uniforms, foamed leather and shoes, skateboards, and bags, etc. Excellent cutting and weeding properties. Even detailed logos and extremely small lettering are cuttable.
3D UV Printable Vinyl ( HTV-300S )
■ Compatible with UV soft ink
■ High printing resolution up to 1440dpi with good ink absorption, and color retention
■ Compatible with UV Printers & Cutters, UV Printers and cutters dual
■ Ideal for print stability, and consistent cutting
■ Transferring onto rough leather, canvas fabric, uniforms, jerseys
■ Excellent machine washing, and good color retention
3D UV printbale vinyl HTV-300S for Uniform Logo
Products
|
Printable Vinyl |
Printable Vinyl |
Printable Vinyl |
|
Code: HTV-300S 0.18mm |
Code: HTV-300S 0.30mm |
Code: HTV-300S 0.60mm |
|
Size: 50cm X 30M/Roll, 100cm X 30M/Roll, other specifications are required |
||
|
Inks: UV soft ink |
||
|
Printers: UV Printers and Cutters, or Printers and Cutters dual |
||
 |
 |
 |
Printer recommendations
Step by step: UV Printing, Heat transferring
step1. Print patterns by UV Printers
step2.Cut patterns by platform Vinyl cutting plotters
step3. Weeding and laminate with adhesive film
Step4. Place the image line facing upwards onto the target fabric laminate with adhesive film
Step 5. Setting a heat press at 165°C for 25 seconds using moderate pressure.
step 6. Peel the adhesive polyester film starting at the corner.
step 7. Finished.
Finishing recommendations
Material Handling & Storage: conditions of 35-65% Relative Humidity and at a temperature of 10-30°C.
Storage of open packages: When an open packages of media is not being used remove the roll or sheets from the printer cover the roll or sheets with a plastic bag to protect it from contaminants, if you are storing it on end, use an end plug and tape down the edge to prevent damage to the edge of the roll do not lay sharp or heavy objects on unprotected rolls and do not stack them.
Alizarin Technologies Inc.
Add: 901~903, NO.3 building, UNIS SCI-TECH Park, Fuzhou High-Tech Zone, Fujian, China.
Tel: +86-591-83766293/83766295 Fax: +86-591-83766292
Website: https://www.alizarinchina.com/solutions/printable-and-laser-cutting-pu-flex/
Asia-Pacific & Australia
Ms. Tiffany
e-mail: sales@alizarin.com.cn, WhatsApp: https://wa.me/8613506998622
North & South America
Mr. Henry
e-mail: cc@alizarin.com.cn whatsapp: https://wa.me/8613599392619
Post time: Feb-09-2026
