Maƙallin Dijital Konica Minolta AccurioPress C14010S don bugawa akan kofunan yumbu!

Mataki na 1. Buga Laser:

Saitin bugawa na firintocin laser na nau'ikan samfura da samfura daban-daban ba iri ɗaya bane. Da fatan za a karanta umarnin aiki na firintocin laser a hankali ko kuma a tuntuɓi wakilin tallace-tallace na firintocin laser don saitunan buga laser.

Mataki na 2. Shafawa kafin lokaci:

Jiƙa napkin tsafta a cikinFJ5 mai riga-kafiRuwan da aka riga aka yi masa magani a hankali sannan a goge saman murfin da aka buga da laser a hankali. A bar shi ya bushe ta halitta na kimanin minti 5.
Lura: Bai kamata a sami digo na ruwa ba. Idan akwai, a goge su da busasshen auduga.

mataki na 3. Zamewar ruwa:

A jiƙa a cikin ruwan ɗumi (zafin ruwan yana kusan 30 ~ 45 °C) na kimanin daƙiƙa 30 ~ 60, har sai Pretty-Film (PF-150) ya rabu da takardar da aka yi amfani da ita cikin sauƙi.

mataki na 4. Cire kumfa

Da zarar saman da aka buga ya fuskanci ƙasa, danna takardar baya don raba shi da fim ɗin, sannan a bar fim ɗin a kan samfurin tayal ɗin. Danna fim ɗin sannan a zame shi a hankali zuwa wurin da ya dace. Yi amfani da kankana ta roba kotawul ɗin da aka jika(gaurayen polyester 88.3%/11.7% na zare na nailan) don goge ɗigon ruwa da kumfa a hankali tsakanin fim ɗin da samfurin tayal.

mataki na 5. yin burodi:

Saita zafin yin burodi na lantarki zuwa130°C~145°Cda kuma lokacin da za a5~8mintuna. Za a iya tantance mafi kyawun zafin jiki da lokaci ne kawai bayan gwaje-gwaje da yawa.
Ana buƙatar a dumama kayayyakin tayal ɗin yumbu a hankali zuwa zafin da ake buƙata don guje wa canjin zafin jiki kwatsam da fashewar tayal ɗin ba zato ba tsammani.
Sanya tayal ɗin yumbu a cikin tanda mai amfani da wutar lantarki, rufe ƙofar, sannan daidaita maɓallin lokacin zuwa mintuna 5-10. Da zarar lokacin yin burodi ya isa, buɗe ƙofar tanda, sanya safar hannu masu jure zafi mai yawa, cire tayal ɗin yumbu, sannan sanya tayal ɗin yumbu a kan tebur mai jure zafi.

Mataki na 6. Yagewar fim:

Bari ya huce na tsawon mintuna 30-60 sannan ya fara cire fim ɗin daga kusurwoyin.

mataki na 7. yin burodi:

Saita yin burodin lantarki a mafi yawan zafin jiki zuwa170°C ~ 190°Cda kuma lokacin da za a5~8mintuna don Inganta launi

Matakan kariya:

Don Allah kar a yi ƙoƙarin gogewa, gogewa ko tsinken samfurin da aka gama, domin yana buƙatar a bar shi na akalla awanni 24 don samun mafi kyawun ƙarfi.

Tayoyin suna shan ruwa sosai, don haka kada a jiƙa su a cikin ruwa don guje wa samar da kumfa mai yawa yayin yin burodi, wanda zai haifar da kumburin a cikin hotunan.