Canja wurin zafi PU Flex Glow A cikin Duhu
Cikakken Bayani
Haske A Cikin Duhun Heat Canja wurin PU Flex
Glow in Dark Heat Canja wurin PU Flex shine kayan hoto-chromic tare da haske a cikin duhu wanda aka samar bisa ga ka'idar Oeko-Tex Standard 100, Flex ne na Polyurethane wanda ya dogara da fim ɗin polyeted tare da haske a cikin duhu, kuma tare da ingantaccen zafi narke m.Don haka ya dace don canja wurin kayan yadi kamar auduga, gaurayawan polyester / auduga, rayon / spandex da polyester / acrylic da dai sauransu Ana iya amfani da shi don bugawa akan T-shirts, wasanni & lalacewa na nishaɗi, riguna, sawar keke da abubuwan talla.
Amfani
n Keɓance masana'anta tare da zane-zanen launuka masu yawa da aka fi so.
∎ An ƙera shi don ingantacciyar sakamako akan auduga mai duhu ko haske ko audugar gauraya yadudduka
∎ Mafi dacewa don keɓance T-shirts, jakunkuna na zane, atamfa, jakunkuna na kyauta, pad ɗin linzamin kwamfuta, hotuna akan kwali da sauransu.
∎ Ƙarfe a kunne tare da na'urorin buga ƙarfe na gida na yau da kullun.
■ Ana iya wankewa da kyau kuma kiyaye launi
■ Ƙarin sassauƙa kuma mafi na roba a zafin jiki,
∎ Kyakkyawan juriya mara zafi, sama da -60°C tare da sassauci mai kyau
Canja wurin zafi PU Flex (CCF-NV-903 Glow In Dark) bidiyo sarrafa bidiyo
1. Vinyl Yankan Plotter
girman: 50cm X 15 M / Roll
yanke ta duk na al'ada vinyl yankan mãkirci kamar: Roland GS-24, Mimaki CG-60SR, Graphtec CE6000 da dai sauransu.
Ƙarin aikace-aikace da masana'anta
2. Tebur Vinyl Yankan Plotter
Girman: 12'' 50cm / Roll, da takardar A4
yanke ta hanyar yankan katako kamar Panda Mini cutter, Silhouette CAMEO, GCC i-Craft, Circut da dai sauransu don yin zane.
Tebur Yankan Plotter
Ƙari daga aikace-aikacen mu
3. Tef ɗin Canja wurin zafi na ado
Girman: 2.5cm, 5.0cm x 100 M / yi
ta tef ɗin canja wurin zafi don Tufafi & Kayan Ado, fata da sauransu.
Ƙari daga aikace-aikacen kayan ado na masana'anta
Amfanin samfur
4.Cutter Shawarwari
Canja wurin zafi PU Flex Glow a cikin Duhu za a iya yanke shi ta duk masu yin makirci na vinyl na al'ada kamar: Roland CAMM-1 GR/GS-24, STIKA SV-15/12/8 tebur, Mimaki 75FX/130FX jerin, CG-60SR/100SR / 130SR, Graphtec CE6000 da dai sauransu.
5.Yanke saitin makirci
Ya kamata ku daidaita matsi na wuka, yanke saurin gwargwadon shekarun ku da kuma Ruɗani ko girman rubutu.
Lura: Bayanan fasaha na sama da shawarwari sun dogara ne akan gwaji, amma yanayin aiki na abokin ciniki,
marasa sarrafawa, ba mu da garantin amfani da su, Kafin amfani, Da fatan za a fara cikakken gwaji.
6.Iron-Akan canja wuri
■ Shirya barga mai tsayin daka mai jure zafi wanda ya dace da guga.
∎ Gabatar da ƙarfen zuwa saitin <ulu>, ana ba da shawarar zafin ƙarfe 165°C.
■ A taƙaice baƙin ƙarfe masana'anta don tabbatar da cewa ya yi santsi gabaɗaya, sa'an nan kuma sanya takardar canja wuri a kai tare da hoton da aka buga yana fuskantar ƙasa.
■ Kada a yi amfani da aikin tururi.
∎ Tabbatar cewa zafi yana jujjuya shi daidai a duk yankin.
■ Ƙarfafa takardar canja wuri, yin amfani da matsa lamba gwargwadon yiwuwa.
■ Lokacin motsa ƙarfe, ya kamata a ba da ƙarancin matsi.
■ Kar a manta kusurwoyi da gefuna.
■ Ci gaba da yin guga har sai kun bi gefen hoton gaba ɗaya.Wannan duka tsari ya kamata ya ɗauki kusan daƙiƙa 60-70 don saman hoton 8 "x 10".Biye ta hanyar guga dukkan hoton da sauri, sake dumama duk takardar canja wuri na kusan 10-13 seconds.
■ Kwasfa takardar baya da ta fara daga kusurwa bayan aikin guga.
7.Matsalolin zafi
∎ Saita na'ura mai ɗaukar zafi 165°C na tsawon daƙiƙa 15-25 ta amfani da matsakaicin matsa lamba.ya kamata latsa ya rufe da ƙarfi.
■ A taƙaice danna masana'anta a 165°C na tsawon daƙiƙa 5 don tabbatar da cewa ya yi santsi.
∎ Sanya takardar canja wuri a kanta tare da hoton da aka buga yana fuskantar ƙasa.
∎ Latsa injin 165°C na 15 ~ 25 seconds.
■ Bawon fim ɗin baya yana farawa daga kusurwa.
8. Umarnin Wanke:
A wanke ciki cikin RUWAN SANYI.KAR KA YI AMFANI DA BLEACH.Sanya cikin na'urar bushewa ko kuma rataya don bushewa nan da nan.Don Allah kar a shimfiɗa hoton da aka canjawa wuri ko T-shirt saboda wannan na iya haifar da tsagewa ya faru, Idan tsagewa ko wrinkling ya faru, da fatan za a sanya takardar shaida mai laushi akan canja wuri kuma danna zafi ko baƙin ƙarfe na ƴan daƙiƙa. sake latsawa da ƙarfi akan duk canja wuri.Da fatan za a tuna kada a yi baƙin ƙarfe kai tsaye a saman hoton.
9.Gama Shawarwari
Sarrafa kayan abu & Ajiye: yanayi na 35-65% Dangantakar Dangi kuma a zazzabi na 10-30°C.
Adana buɗaɗɗen fakiti: Lokacin da ba a yi amfani da fakitin kafofin watsa labaru ba, cire nadi ko zanen gado daga firintar da ke rufe nadi ko zanen gado da jakar filastik don kare shi daga gurɓata, idan kuna adana shi a ƙarshe, yi amfani da filogi na ƙarshe. kuma a buga gefen gefen don hana lalacewa a gefen lissafin kar a ajiye abubuwa masu kaifi ko nauyi akan nadi marasa kariya kuma kar a jera su.
