Lanƙwasa Mai Zafi na Tambari
Cikakken Bayani game da Samfurin
Na'urar Zafi Mai Lankwasa Tambarin Yadi (HS930, HS931W)
Lanƙwasa Mai Zafi na Tambari Ana samar da shi bisa ga ƙa'idar Oeko-Tex Standard 100, kayan manne ne mai zafi da aka yi da Polyurethane wanda aka yi da fim ɗin polyested, wanda ya dace da yawancin foil ɗin tambarin zafi, kuma ana iya amfani da shi don yadi kamar auduga, gaurayen polyester/auduga, rayon/spandex da polyester/acrylic da sauransu. Ana iya amfani da shi don tambarin zinare, azurfa da adadin riguna, kayan wasanni da nishaɗi, kayan sawa, kekuna da kayan talla.
| Fihirisar HS930 | Fihirisar HS931W | Hanyoyin Gwaji | |
|
|
| ||
| Kauri (jimla) | 135 μm (mil 5.31) | 170 μm (mil 6.69) | ISO 534 |
| Farin fata | 55W (CIE) | 70W (CIE) | CIELAB - Tsarin |
| Yawan inuwa | >5% | >95% | ISO 2471 |
| Mai sheƙi (60°) | 5 | 5 |
Fa'idodi
■ Ya dace da yawancin foil ɗin tambarin zafi.
■ Ya dace don keɓance tambarin ƙarfe da adadin riguna, jakunkunan zane, jakunkunan kyauta, takalma da sauransu.
■ An ƙera shi don samun sakamako mai kyau akan yadin auduga mai duhu ko mai launin haske ko na auduga/polyester
■ A yi amfani da ƙarfe na gida na yau da kullun, ƙaramin injin buga zafi, ko injin buga zafi
■ Ana iya wankewa da kuma kiyaye launi
■ Kyakkyawan juriya ga yanayin zafi mai ƙarancin zafi, sama da 6°C tare da sassauci mai kyau
"Tambarin ƙarfe da adadin Yadi tare da Tambarin Tambari Mai Zafi (HS930 Clear)"
Me za ku iya yi don Tufafi da kayan ado?
Amfani da Samfurin
4. Shawarwari kan Yanka
Amfani da Fabric Hot Stamp Flex ta hanyar masu yanke zane na gargajiya kamar: Roland GS-24, Mimaki CG-60SR, Graphtec CE6000 da sauransu da kuma na'urar yanke tebur: kamar Panda Mini cutter, Silhouette CAMEO, GCC i-Craft, Circut
5. Saitin yanke makirci
Ya kamata ka daidaita matsin wuka a koyaushe, ka rage saurin gwargwadon shekarun wukarka da kuma girman rubutu mai rikitarwa ko rikitarwa.
Lura: Bayanan fasaha da shawarwarin da ke sama sun dogara ne akan gwaji, amma yanayin aiki na abokin cinikinmu, rashin iko, ba mu tabbatar da amfaninsu ba. Kafin amfani, Da fatan za a fara gwada cikakken bayani.
6. Canja wurin Iron-On na Gida
Mataki na 1:
■ A shirya wuri mai ɗorewa, mai jure zafi wanda ya dace da yin guga a kai.
■ A kunna ƙarfen har zuwa yanayin < ulu>, ana ba da shawarar a yi amfani da shi wajen yin guga a zafin da ya kai 165°C.
Mataki na 2:
■ A ɗan yi masa guga don tabbatar da cewa ya yi santsi sosai, sannan a sanya Fabric Hot Stamp Flex a kai tare da hoton da aka yanke yana fuskantar ƙasa.
■ Kada a yi amfani da aikin tururi.
■ A tabbatar an daidaita zafin a kan dukkan yankin.
■ A yi amfani da matsewar manne mai zafi na masana'anta, a shafa matsi gwargwadon iko.
■ Lokacin motsa ƙarfe, ya kamata a rage matsin lamba.
■ Kada ku manta da kusurwoyi da gefuna.
■ Ci gaba da yin guga har sai kun gano gefunan hoton gaba ɗaya. Wannan aikin gaba ɗaya zai ɗauki kimanin daƙiƙa 60-70 don saman hoton mai girman inci 8x 10". Biyo baya ta hanyar goge dukkan hoton da sauri, dumama dukkan Hot Stamp Flex na tsawon daƙiƙa 10-13.
■ A cire fim ɗin baya daga kusurwa idan ya yi sanyi sosai.
Mataki na 3:
■ Sanya Foil ɗin Zafi a kai tare da shafa mai a ƙasa. Sannan a sanya takarda mai hana mai a kai.
■ A yi amfani da baƙin ƙarfe a takardar da ke hana mai, a shafa matsi gwargwadon iko.
■ Lokacin motsa ƙarfe, ya kamata a rage matsin lamba.
■ Kada ku manta da kusurwoyi da gefuna.
■ Ci gaba da yin guga har sai kun gano gefen da aka shafa gaba ɗaya. Wannan aikin gaba ɗaya zai ɗauki kimanin daƙiƙa 25-35 don saman hoton 8"x 10". Biyo baya ta hanyar yin guga da aka shafa da sauri, sannan a sake dumama dukkan takardar da ke hana mai na tsawon daƙiƙa 10-15.
■ A cire foil ɗin Tambarin Zafi daga kusurwa idan ya yi sanyi sosai.
7. Canja wurin Heat Press
Mataki na 1:
■ Sanya injin matse zafi a 165°C na tsawon daƙiƙa 15-25 ta amfani da matsakaicin matsin lamba. Ya kamata matsewar ta rufe sosai.
■ A ɗan danna masakar a zafin 165°C na tsawon daƙiƙa 5 domin tabbatar da cewa ta yi santsi sosai.
Mataki na 2:
■ Sanya Fabric Hot Stamp Flex a kai tare da hoton da aka yanke yana fuskantar ƙasa.
■ A danna injin a zafin 165°C na tsawon daƙiƙa 5~10.
■ A cire fim ɗin bayan idan ya yi sanyi sosai, a fara daga kusurwa.
Mataki na 3:
■ Sanya Foil ɗin Zafi a kai tare da hoton da aka shafa yana fuskantar ƙasa.
■ A danna injin a zafin 165°C na tsawon daƙiƙa 5~10.
■ A cire foil ɗin Tambarin Zafi idan ya yi sanyi gaba ɗaya, daga kusurwa.
8. Umarnin Wankewa:
A wanke ciki da ruwan sanyi. KAR A YI AMFANI DA BLEACH. A saka a cikin na'urar busar da kaya ko a rataye shi don ya bushe nan take. Don Allah kar a miƙe hoton da aka canja ko rigar T-shirt domin wannan na iya haifar da tsagewa. Idan tsagewa ko ƙuraje suka faru, don Allah a sanya takardar takarda mai hana mai a kan canja wurin sannan a yi amfani da na'urar dumamawa ko ƙarfe na ɗan lokaci kaɗan, a tabbatar an danna shi sosai a kan dukkan canja wurin. Don Allah a tuna kada a yi amfani da ƙarfe kai tsaye a kan saman hoton.
9. Shawarwari na Kammalawa
Kula da Kayayyaki da Ajiya: yanayin zafi na 35-65% kuma a zafin jiki na 10-30°C.
Ajiye fakitin da aka buɗe: Idan ba a yi amfani da fakitin da aka buɗe na kayan rubutu ba, cire naɗin ko zanen gado daga firintar, rufe naɗin ko zanen gado da jakar filastik don kare shi daga gurɓatawa, idan kuna adana shi a ƙarshe, yi amfani da makulli na ƙarshe kuma ku yi tef a gefen don hana lalacewa ga gefen naɗin. Kar a sanya abubuwa masu kaifi ko nauyi a kan naɗin da ba a kare su ba kuma kada a tara su.
