Mataki na 1. Buga Laser:

Saitin bugawa na firintocin laser na nau'ikan samfura da samfura daban-daban ba iri ɗaya bane. Da fatan za a karanta umarnin aiki na firintocin laser a hankali ko kuma a tuntuɓi wakilin tallace-tallace na firintocin laser don saitunan buga laser.

Mataki na 2. Shafawa kafin lokaci:

Jiƙa mayafin tsafta a cikin ruwan da aka riga aka yi wa Pre-Coat FJ5 ​​sannan a goge saman murfin da aka buga da laser a hankali. A bar shi ya bushe ta halitta na kimanin minti 5.
Lura: Bai kamata a sami digo na ruwa ba. Idan akwai, a goge su da busasshen auduga.

mataki na 3. Zamewar ruwa:

A jiƙa a cikin ruwan ɗumi (zafin ruwan yana kusan 50 ~ 60 °C) na kimanin daƙiƙa 30 ~ 60, har sai an iya raba Pretty-Film (PF-150) da takardar da aka yi amfani da ita cikin sauƙi.

mataki na 4. Cire kumfa

Da zarar saman da aka buga ya fuskanci ƙasa, danna takardar baya don raba shi da fim ɗin, sannan a bar fim ɗin a kan gilashin. Danna fim ɗin a hankali a zame shi zuwa wurin da ya dace. Yi amfani da kankana ta roba ko tawul mai jika don goge ɗigon ruwa da kumfa a hankali tsakanin fim ɗin da samfurin sana'ar.

mataki na 5. yin burodi:

Saita zafin yin burodi na lantarki zuwa130°C~145°Cda kuma lokacin da za a5~10mintuna. Za a iya tantance mafi kyawun zafin jiki da lokaci ne kawai bayan gwaje-gwaje da yawa.
Ana buƙatar a dumama kayayyakin gilashi a hankali zuwa zafin da ake buƙata don guje wa canjin zafin jiki kwatsam da fashewar gilashin ba zato ba tsammani.
Sanya kofin yumbu a cikin tanda mai amfani da wutar lantarki, rufe ƙofar, sannan daidaita maɓallin lokacin zuwa mintuna 5-10. Da zarar lokacin yin burodi ya isa, buɗe ƙofar tanda, sanya safar hannu masu jure zafi mai yawa, cire kofin yumbu, sannan sanya kofin a kan tebur mai jure zafi.

Mataki na 6. Yagewar fim:

Bari ya huce na tsawon mintuna 30-60 sannan ya fara cire fim ɗin daga kusurwoyin.

Don Allah kar a yi ƙoƙarin gogewa, gogewa ko tsinken samfurin da aka gama, domin yana buƙatar a bar shi na akalla awanni 24 don samun mafi kyawun ƙarfi.