Kyawawan Fim (PF-150)
Un- Gilashin cognac/goblet mai rufi,Ba a yanke ba!
Fim Mai Kyau (PF-150) wanda za a iya bugawa ta hanyar firintocin laser masu launi, ko firintocin kwafin laser masu launi tare da ciyarwa mai faɗi da fitarwa mai faɗi, kamar OKI Data C941dn, ES9542, Konica Minolta AccurioLabel 230, don duk ayyukan sana'ar gilashin ku. Keɓance kuma keɓance aikin ku ta hanyar buga ƙira na musamman akan Fim ɗinmu Mai Kyau. Canja wurin zane zuwaba a rufe shi baGilashin da aka yi da gilashi. Bayan yin burodi a cikin tanda mai amfani da wutar lantarki a zafin jiki na 110°C ~ 190°C na kimanin mintuna 5-10, Bayan sanyaya zuwa zafin ɗaki, a cire fim ɗin saman don samun samfurin da aka gama. Abubuwan ban mamaki na Pretty-Film sune cewa yana yi.babuƙatar shafi, kumaBa a yanke baHaka kuma yana jure zafi, yana jure yanayi kuma ana iya wanke shi.
Keɓance tambarin ku masu launi, hotuna tare da Pretty-Film (PF-150) don gilashin cognac
Sunan samfurin:PF-150
Sunan samfurin:Kyakkyawa - Fim
Babban bayani dalla-dalla:
A4 – zanen gado 100/fakiti, A3 – zanen gado 100/fakiti, 33cm X 30m/fakiti,
Firintocin Laser:Firintar laser mai launi tare da shigar da takarda mai faɗi da fitarwar takarda mai faɗi ana fifita su, kamar bayanan OKI C5600n, Konica-Minolta C221, Fuji Xerox DC1256GA, Xerox C8000.
Fitattun siffofi:Ba a buƙatar shafa riga-kafi, babu yankewa. Yana jure zafi, yana jure yanayi, kuma ana iya wankewa.
Manyan kasuwanni:Yi Tambayoyi da Hotunan ku na Musamman don gilashin gilashi
Ƙarin yanayin aikace-aikace
Mataki-mataki daga zamiya ruwa zuwa canja wurin zafi ta hanyar Pretty-Film：
Mataki na 1. Buga Laser:
Saitin bugawa na firintocin laser na nau'ikan samfura da samfura daban-daban ba iri ɗaya bane. Da fatan za a karanta umarnin aiki na firintocin laser a hankali ko kuma a tuntuɓi wakilin tallace-tallace na firintocin laser don saitunan buga laser.
Mataki na 2. Shafawa kafin lokaci:
Jiƙa mayafin tsafta a cikin ruwan pre-Coat F sannan a goge saman murfin da aka buga da laser a hankali. A bar shi ya bushe ta halitta na kimanin minti 5.
Lura: Bai kamata a sami digo na ruwa ba. Idan akwai, a goge su da busasshen auduga.
mataki na 3. Zamewar ruwa:
A jiƙa a cikin ruwan ɗumi (zafin ruwan yana kusan 50 ~ 60 °C) na kimanin daƙiƙa 30 ~ 60, har sai an iya raba Pretty-Film (PF-150) da takardar da aka yi amfani da ita cikin sauƙi.
mataki na 4. Cire kumfa
Da zarar saman da aka buga ya fuskanci ƙasa, danna takardar baya don raba shi da fim ɗin, sannan a bar fim ɗin a kan gilashin. Danna fim ɗin a hankali a zame shi zuwa wurin da ya dace. Yi amfani da kankana ta roba ko tawul mai jika don goge ɗigon ruwa da kumfa a hankali tsakanin fim ɗin da samfurin sana'ar.
mataki na 5. yin burodi:
Saita zafin yin burodi na lantarki zuwa130°C~145°Cda kuma lokacin da za a5mintuna. Za a iya tantance mafi kyawun zafin jiki da lokaci ne kawai bayan gwaje-gwaje da yawa.
Ana buƙatar a dumama kayayyakin gilashi a hankali zuwa zafin da ake buƙata don guje wa canjin zafin jiki kwatsam da fashewar gilashin ba zato ba tsammani.
Sanya kofin yumbu a cikin tanda mai amfani da wutar lantarki, rufe ƙofar, sannan daidaita maɓallin lokacin zuwa mintuna 5-10. Da zarar lokacin yin burodi ya isa, buɗe ƙofar tanda, sanya safar hannu masu jure zafi mai yawa, cire kofin yumbu, sannan sanya kofin a kan tebur mai jure zafi.
Mataki na 6. Yagewar fim:
Bari ya huce na tsawon mintuna 30-60 sannan ya fara cire fim ɗin daga kusurwoyin.
Don Allah kar a yi ƙoƙarin gogewa, gogewa ko tsinken samfurin da aka gama, domin yana buƙatar a bar shi na akalla awanni 24 don samun mafi kyawun ƙarfi.
Don ƙarin yanayin aikace-aikace, da fatan za a ziyarcihttps://www.alizarinchina.com/pretty-film-3-product/, ko kuma tuntuɓar Ms. Wendy ta imel:marketing@alizarin.com.cn, ko kuma WhatsApphttps://wa.me/8613506996835don farashi da samfura!
Na gode da gaisuwa,
Ms. Wendy
Kamfanin Alizarin Technologies Inc.
TEL: 0086-591-83766293/83766295
Fax: 0086-591-83766292
YANAR GIZO:https://www.AlizarinChina.com/
ƘARA: 901~903, ginin NO.3, UNIS SCI-TECH Park, Fuzhou High-Tech Zone, Fujian, China.
Lokacin Saƙo: Janairu-20-2025
